QUINT-PS-3x400-500AC/24DC/10
Safety Notes and Warning Instructions
Danger
Before startup please ensure:
The device contains dangerous live elements
and high levels of stored energy.
Never carry out work when the power is turned
on.
Risk of burns
The housing temperature can reach high
values depending on the ambient temperature
and the load of the device.
To ensure that the device can be operated safely and all
functions can be used, please read these instructions
carefully.
The mains has been connected correctly
and protection is provided against electric
shock.
The device can be switched off outside the
power supply according to EN 60950
regulations (e.g., by the line protection on
the primary side).
The protective conductor is connected.
All supply lines have sufficient fuse
protection and are the correct size.
All output cables are the correct size for
the maximum device output current or
have separate fuse protection.
Sufficient convection is ensured.
QUINT POWER is a built-in device. Installation
and startup must only be carried out by
qualified personnel. The relevant country-
specific regulations (e.g., VDE, DIN) must also
be observed.
Installation
Risk of burns
The housing temperature can reach high
values depending on the ambient temperature
and the load of the device.
To ensure sufficient convection, the following
13
14
DC
OK
minimum spacing is required between other
14 D
OK
Ou
u t
13
C
tp
DC
24
V
10
A
modules:
5 cm above and below the device.
No minimum spacing to other modules at the
DC
O K
sides is required for proper operation of the
,5- ju
,5V
22 A d
28 st
device.
AC ut
L3 3 0 -
L1
L2
Inp
4
L 0
50
0V
The power supply unit can be snapped onto all DIN rails
according to EN 60715 and must be mounted horizontally
(connection terminal blocks facing downwards).
Figure 3
Convection
100033_04_en
PHOENIX CONTACT
5
相关PDF资料
2938620 PWR SUPPLY 20A 100-240AC 24DC
2938633 POWER SUPPLY 30A 24VDC
2938646 POWR SUPPLY 40A 3X400-500AC 24DC
2938714 PWR SUPPLY 3A 100-240AC 5DC
2938727 POWR SUPPLY 20A 3X400-500AC 24DC
2938730 PWR SUPPLY 2A 100-240AC 24VDC
2938743 POWER SUPPLY 1A 2X15VDC
2938756 PWR SUPPLY 2A 100-240AC 10-15VDC
相关代理商/技术参数
29-3861P 制造商:AIM Cambridge Connectivity Solutions 功能描述:
2938620 功能描述:DIN导轨式电源 QUINT 24V 20.0A RoHS:否 制造商:Mean Well 产品:Linear Supplies 商用/医用:Commercial 输出功率额定值:960 W 输入电压:180 VAC to 264 VAC, 254 VDC to 370 VDC 输出端数量:1 输出电压(通道 1):48 V 输出电流(通道 1): 输出电压(通道 2): 输出电流(通道 2): 输出电压(通道 3): 输出电流(通道 3): 尺寸:150 mm L x 110 mm W
2938633 功能描述:DIN导轨式电源 QUINT 3PHASE 24V 30A RoHS:否 制造商:Mean Well 产品:Linear Supplies 商用/医用:Commercial 输出功率额定值:960 W 输入电压:180 VAC to 264 VAC, 254 VDC to 370 VDC 输出端数量:1 输出电压(通道 1):48 V 输出电流(通道 1): 输出电压(通道 2): 输出电流(通道 2): 输出电压(通道 3): 输出电流(通道 3): 尺寸:150 mm L x 110 mm W
29-3863P 制造商:AIM Cambridge Connectivity Solutions 功能描述:
2938646 功能描述:DIN导轨式电源 QUINT 3PHASE 24V 40A RoHS:否 制造商:Mean Well 产品:Linear Supplies 商用/医用:Commercial 输出功率额定值:960 W 输入电压:180 VAC to 264 VAC, 254 VDC to 370 VDC 输出端数量:1 输出电压(通道 1):48 V 输出电流(通道 1): 输出电压(通道 2): 输出电流(通道 2): 输出电压(通道 3): 输出电流(通道 3): 尺寸:150 mm L x 110 mm W
29-3864P 制造商:AIM Cambridge Connectivity Solutions 功能描述:
2938695 制造商:Phoenix Contact 功能描述:MINI-PS-120-230AC/24DC/0.65BL
29387 制造商:Schneider Electric 功能描述:IMPULSE RELAY MX 200/240V CA 50/60H